Running FreeRTOS on Xilinx Zybo: Difference between revisions

From ift
(Created page with "Tested on Xilinx Vivado/SDK 2017.3, Ubuntu 16.04 LTS. This tutorial assumes you have completed the "Creating example project with AXI4 Lite peripheral in Xilinx Vivado"-...")
 
mNo edit summary
Line 1: Line 1:
Tested on Xilinx Vivado/SDK 2017.3, Ubuntu 16.04 LTS.
Tested on Xilinx Vivado/SDK 2017.3, Ubuntu 16.04 LTS.
This tutorial assumes you have completed the "[[Creating example project with AXI4 Lite peripheral in Xilinx Vivado]]"-tutorial.
= Running FreeRTOS on Xilinx Zybo =
This tutorial will help in setting up Xilinx Zybo SoC-board to run FreeRTOS with an example project that toggles the LEDs on the board.
It assumes that the user has successfully exported the hardware bitstream from the Xilinx Vivado project created in the previous tutorial linked at the top.


= Setup SDK =
Launch Xilinx SDK from the project in Xilinx Vivado: ''File --> Launch SDK''.


This tutorial assumes you have completed the "[[Creating example project with AXI4 Lite peripheral in Xilinx Vivado]]"-tutorial.
Create a new blank application project with ''File --> New --> Application Project'' and name it "FreeRTOS_example_project".

Revision as of 13:26, 6 December 2017

Tested on Xilinx Vivado/SDK 2017.3, Ubuntu 16.04 LTS. This tutorial assumes you have completed the "Creating example project with AXI4 Lite peripheral in Xilinx Vivado"-tutorial.

Running FreeRTOS on Xilinx Zybo

This tutorial will help in setting up Xilinx Zybo SoC-board to run FreeRTOS with an example project that toggles the LEDs on the board. It assumes that the user has successfully exported the hardware bitstream from the Xilinx Vivado project created in the previous tutorial linked at the top.

Setup SDK

Launch Xilinx SDK from the project in Xilinx Vivado: File --> Launch SDK.

Create a new blank application project with File --> New --> Application Project and name it "FreeRTOS_example_project".