CAEN 40CH HV PSU: Difference between revisions

From ift
m (New page: This how to is based on using the functionality of the custome Labview VI's. Refer to the User Manual for using the Terminal interface of the unit. === RS 232-Setting === Baud Rate: ...)
 
mNo edit summary
 
Line 1: Line 1:
This how to is based on using the functionality of the custome Labview VI's. Refer to the User Manual for using the Terminal interface of the unit.  
This how to is based on using the functionality of the custome Labview VI's. Refer to the User Manual for using the Terminal interface of the unit.


=== RS 232-Setting ===
=== RS 232-Setting ===
Line 8: Line 8:
Stop Bits:    1
Stop Bits:    1
Flow Control: None
Flow Control: None
Kladd
min. write time between commands: 60ms (30 ms worst case)
Bytes recieved (From top Menu @ 9600 bauds)
"1": 256 bytes (220 ms)
"1+b": 170 bytes (150 ms)
"1+b+a": 273 bytes (230 ms)
"1+b+a+n": 272 bytes (230 ms)
"1+b+a+c/i/j..": 14 bytes (15 ms)
"1+b+a+c/i/j..+X": 1 bytes (1 ms)
"1+b+a+c/i/j..+X+/r/n": 272 bytes (230 ms)

Latest revision as of 13:26, 6 March 2009

This how to is based on using the functionality of the custome Labview VI's. Refer to the User Manual for using the Terminal interface of the unit.

RS 232-Setting

Baud Rate: 9600 Parity: None Data Bits: 8 Stop Bits: 1 Flow Control: None


Kladd

min. write time between commands: 60ms (30 ms worst case)

Bytes recieved (From top Menu @ 9600 bauds) "1": 256 bytes (220 ms) "1+b": 170 bytes (150 ms) "1+b+a": 273 bytes (230 ms) "1+b+a+n": 272 bytes (230 ms) "1+b+a+c/i/j..": 14 bytes (15 ms) "1+b+a+c/i/j..+X": 1 bytes (1 ms) "1+b+a+c/i/j..+X+/r/n": 272 bytes (230 ms)